We are amongst the leading manufacturers and exporters of Infrared Heaters that is widely used and appreciated by our clients for precise functioning and longer service life. These are designed in conformation with international quality standards and produce maximum output in the form of heat energy. Provided with the exclusive built in heating coil, these heaters are widely used for thermoforming machines and shrink packaging.
Features and size
These heaters are available in the standard size of 122 mm x 122 mm, 245 mm x 60 mm and 120 mm x 60 mm with Power rating of 250W, 400W, 600W, 800W AND 1000W.
Ceramic Flat Infrared Heaters come in with and without thermocouple.
An efficient heat source for many industrial and commercial applications, our ceramic IR Heaters eater is available in an array of sizes and modules. Our ceramic IR heaters can easily be installed and arranged to produce heat patterns limited only by the imagination of the designer. We are offer a wide range of Ceramic Infrared Heaters that is manufactured with latest technology and research to provide best to our customers. These heaters are manufactured by a firmly burnt-in heating coil, to produce maximum output. The heater is also provided with a high heatproof resistance wire that offers safety against much damage. The glaze used in this heater has excellent radiation properties therefore the radiation efficiency is also very high. Moreover, these heaters are available with color changing feature as yellow ceramic IR heater (CC FSR).
Ceramic infrared heaters are 96% infrared energy efficient. Uses for electric infrared heat can be found in many industries and applications and can be grouped into four major categories:
Curing, Drying, Heating, Cooking
Within each of these major categories are literally hundreds of specific applications, and the list keeps growing as technology develops.
Our ceramic infrared heaters (emitters) are manufactured with three basic emitter faces: Concave, Flat and Convex. The concave surface will emit a “concentrated” radiant pattern which is highly effective when zone heating is desired as well as radiant heating in general. Flat surface emitters will produce a “uniform” pattern for even heating at a close proximity between the emitter and the target being heated. Finally, the convex shaped emitter gives off a “wide area”
These heaters are durable, splash-proof and have a non-corrosive finish.
Our Ceramic Infrared Heaters are available in two standard models:
Full length 245mm (FSR) 60mm 250 to 1000W
Half length 122mm (FSR/2) 60mm 125 to 50
The material used for the production do not oxidize therefore the surface always remains clean and do not wear out
As the coil is embedded in ceramic material, it can be installed in any possible position
In thermoforming & vacuum forming machines
In PVC pipe belling/ socket machines
In hot stamping machines
As heat therapy equipment
In shrink packaging
Medium-wave and carbon (CIR) infrared heaters operate at filament temperatures of around 1000 °C. They reach maximum power densities of up to 60 kW/m² (medium-wave) and 150 kW/m² (CIR). Infrared heating Elements provide medium wave infrared radiation. They are favored in industrial applications where rapid heater response is necessary, including systems with long heater off cycles.
Our medium wave infrared heating elements are particularly effective in systems where rapid heater response and/or zone controlled heating is required.They have a broad emission spectrum and cover various absorption ranges. We manufacture and supply superior quality medium wave infrared heater that consists of a helically wound resistance coil housed in a pure vitreous silica fused quartz tube. The quartz tubing is terminated with ceramic insulating caps that are specially designed to allow the quartz tubing to breathe. The ceramic caps are tightly fastened to the quartz tube with high temperature cement that allows the quartz to breathe. Made of high quality material, these are superior in performance and offer long serving life.
Quartz infrared heaters are available in diameters of 8, 10, 12, 15 and 19 mm
Available in lengths from 300 to 1500 mm
Can be used only in horizontal position
Fitted with specially designed heating coil to ensure longer life
Least maintenance required
Our medium wave infrared lamps have found applications in:
Shrink packaging machines
It is our avowed mission to come out with the best quality product that can compete in the international market for their technological superiority,performance, durability and price compatibility. We offer a comprehensive range of Medium Wave Infrared Heating Modules that is provided with a resistance wire, which is enclosed in a quartz tube of 8 mm outer diameter. These quartz tubes are placed parallel to each other and are mounted in a special housing. The size of this heater is such that these can replace ceramic heater. Available in variety of specifications, these can also be designed as per client's requirements. Our Infrared heaters have a unique filament design that combines the versatile medium-wave spectral emission with very short reaction times of just seconds. They are made with high-quality quartz tubes and gold reflectors for high efficiency. The unique design gives them higher power densities and good mechanical stability. Round tube designs are also available.
Shrink packaging tunnels
Drying lacquers and paints
250 to 100W
125 to 650w
The high heating efficiency and rapid cool down makes the Twin Tube Medium Wave IR Heater from our unit is one of its kind with in the range. Suitable for all medium-wave applications, this heater also allows the user to match temperatures to the optimal absorption wavelength for each application. Together, these features eliminate overheating and contamination of sensitive substrates, a critical consideration for many applications. IR heaters have a unique filament design that combines the versatile medium-wave spectral emission with very short reaction times of just seconds. They are made with high-quality quartz tubes and gold reflectors for high efficiency. The unique Twin Tube design gives our product higher power densities and good mechanical stability. Our unit is engaged in offering a wide range of Twin Tube Medium Wave Infrared Heater that is used for several industrial applications. Our Twin Tube MW IR Heater is made up of 8-shape high-purity clear quartz twin tube, with each tube having Ni-Chrome heating coil that runs in U Shape in the tube. We provide these heaters in special body cover, built-in thermocouple and fixing clips facilitating for durability and efficiency.
Heating up and cooling down time is approximately 50 seconds
Available with gold reflector and without reflector
The outer rear side of the tube of the reflector has the gold coating
Heat loss from backside is prevented by the reflector, thereby power is saved
Results in making surrounding work area cooler
Increases the efficiency and directionality of the heater
Standard sizes (in cross section): 11 mm x 23 mm & 15 mm x 32 mm
Maximum length: 200 mm
Power density: 60 KW / m2 can be achieved
Short Wave IR Heaters transmits heat in the form of electromagnetic waves at a velocity of approximately 3,00,000 Km/Sec i.e., at the speed of light. These heaters are not only the fastest in transmitting heat but are most suitable for specific applications involving vacuum technology and dust free (clean room) conditions. These heaters eliminate loss of energy while heating media, and heat loss due to convection. We provide premium range of short wave IR heaters. A short wave I.R. heater consists of a coiled tungsten filament in a quartz tube. It is a combination of a halogen gas and argon, which is present in the tube. The diameter of the filament is less than the diameter of the quartz tube. The spacers/support rings are used to keep the filament of the short wave IR heaters in the centre of the tube. We tailor these heaters to meet the trends and demands in different sectors. This enables the company to offer better and practicable heating and temperature control solutions to its clients.
Short wave infrared heaters from us are suitable for all applications in which the attainment of high temperatures in the shortest possible time is what counts. Their emission maximum is between 0.9 and 1.6 micron. Our comprehensive range of Short Wave Infrared Heaters are at par with the best in the international market. We offer these heaters in different lengths from 5 to30 or as per customer specifications.
Care is taken so that the short wave IR heaters are not subjected to severe vibrations and mechanical shocks.
Heating is done by radiation; this eliminates loss of energy used for heating media and heat loss due to convection
Here the infrared waves penetrate the material, on which it falls and delivers the heat directly to that material
PET perform heating in stretch blow molding machines
Printing ink drying in offset machines
Paper coating drying
Pre-heating prior to embossing
Screen printing curing on T-shirts
Textiles and many more
Our Short Wave Infrared Module are complete and ready for the operation. This provides advantages for both the, user while installing in to the existing systems and for the planing / project engineers.
Because of its modular construction it is possible to make the heating panels of practically any size with heaters length up to 40We are offering Short Wave Infrared Module that is ideal solution for the application of infrared heat technology. These heaters save the user design costs and time and are substantially less expensive than the complete infrared systems. Being user friendly, it is possible to make the heating panels of practically any size with heaters length up to 40. These infrared modules can be individually regulated, controlled and ventilated.
Curing of paint
Drying glaze on Ceramic Tiles
Drying Gumming Sheets
Drying Adhesives Tapes
Car body works
Infrared ovens are used to bake, cure, bond, burn-off, preheat, thermal-form, cook, fuse, shrink, laminate and dry a wide variety of materials. Air is virtually transparent to infrared radiation, and infrared is neither absorbed nor scattered by air. However, water vapor, carbon dioxide and other greenhouse gases do absorb infrared radiation. If the distance between the emitter and the absorber of infrared energy is a few feet or less, the energy absorbed by the gas will be negligible. Infrared ovens consist of infrared lamps that put maximum energy in the area where materials are placed. These ovens are designed for high energy efficiency to save power and fuel cost. Infra red ovens allow to combine with ambient air with the hot air for increased drying speed.
Process temperature can be achieved quickly on line start up.
Rapid cool down prevents product damage.
Small foot print consumes minimal space.
Low maintenance cost.
Low Power Consumption.
It is similar to other batch type Ovens but it has infrared heating elements instead of other heating media.
Temperature control: Automatic-Electronic.
Better quality of product.
Less Process Time.
Less electric consumption as compared to other heating elements
Insulated Ceramic Heaters are available with the standard of
|Type Length||Width||Power Rating*|
|Full Length||248mm||250 to 100W|
|Half Length||125mm||125 to 650W|
They are available in the standard size of